Industrial Paints, Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
Industrial Paints
TUFF COAT POLYMERS PVT.LTD.
An ISO 9001 : 2000 Certified Company
Home Email Sitemap linkedin
 

Lead And Chrome Free Paints Primers & Thinners

Tuff Coat EP-101 Epoxy Paint

Tuff Coats PU-101 Enamel
Tuff Coat Stoving Enamel

Etch  Primer With Hardener
Peelable Clear Lacquer
Tuff Coat St-1 Stove Enamel
Texture / Structure Finish
Tuff Coat PU - 101 Clear Lacquer
Tuff Coats Epoxy Stoving Paint
Epoxy Zinc Rich Primer

Acrofast Primer Surfacer Zinc Phosphate
Lcf Wash Primer

Hb-285 Epoxy Surfacer / Intermediate Coat Znp
Epoxy Paints, Enamels, Stoving Enamels, Etch Primer With Hardener, Peelable Clear Lacquers, Texture Paint, Structure Finish Paint, Epoxy Stoving Paints, Epoxy ZMC Rich Primers, Acrofast Primer Surfacer Zinc Phosphate, LCF Wash Primers, Epoxy Surfacer, Intermediate Coat Zinc Phosphate ZNP, Lead And Chrome Free Paints / Primers / Thinners
 

Epoxy Zinc Rich Primer
INTRODUCTION
 
TUFF COAT Epoxy Zinc rich primer is a two pack system enriched with metallic zinc to provide outstanding performance in highly corrosive environment. Metallic Zinc imparts Cathodic protection to the base metal and Epoxide groups react with polyamide / Amine adduct hardener to form tough, non convertible film at ambient temp.It resists photo degradation by UV light as it contains UV absorber.
 
RANGE OF APPLICATION
 
Suitable for application as a priming coat on structural steel, pipelines, tank exteriors of refineries, power generation plants, mining facilities bulk handling equipment and fertilizer industries etc. This can be TOP-COATED with Epoxy Paints ; Polyurethane paints chlorinated rubber paints for specific applications. 
 
KEY PROPERTIES
 
1. Provides excellent adhesion on blast cleaned steel work.
2. Withstands 120o C dry heat
3. Builds high DFT in single coat
4. Excellent corrosion resistance
5. With suitable TOP-COAT it resists most salts & alkalis
6. Good Acid & alcohol resistance (Direct immersion is not advisable )
7. Resists splash , spillage, immersion of aromatic hydrocarbon & solvents
8.Good abrasion resistance
 
APPLICATION
 
Remove oil, grease and other contaminants using proper degreasing agent. For severe corrosive conditions blast clean the surface. Special care must be taken on weld areas to remove flux & spatter. The cleaned surface should be coated before it gets contaminated or applies wash primer before subsequent coat of zinc rich primer. Stir base thoroughly then mix three parts base and one part hardener by volume to uniform consistency. Allow the mixture to mature for 20-30 min. and stir again before application & occasionally during use to prevent setting of metallic zinc. For Brush Roller,Airless spray application, no thinning is required. In conventional spraying, 5 % to 10 % thinning is recommended for ease of application.
 
NOTE :
1) Use the mixed paint within specified pot life period
2) Do not apply at temperatures below 10o C or at high relative humidity, above 90 % or during rain, fog or mist.
3) Brushes & spray equipment should be cleaned with Thinner EP-102 otherwise equipment is liable to be damaged.
4) TUFF COAT EPOXY ZINC RICH priming is also known as "COLD GALVANIZING"