An ISO 9001 : 2000 Certified Company
Home Email Sitemap
 

Tuff Coat EP-101 Epoxy Paint
Tuff Coats PU-101 Enamel
Tuff Coat Stoving Enamel

Etch  Primer With Hardener
Peelable Clear Lacquer
Tuff Coat St-1 Stove Enamel
Texture / Structure Finish
Tuff Coat PU - 101 Clear Lacquer
Tuff Coats Epoxy Stoving Paint
Epoxy Zinc Rich Primer

Acrofast Primer Surfacer Zinc Phosphate
Lcf Wash Primer

Hb-285 Epoxy Surfacer / Intermediate Coat Znp
 
 

Tuff Coat PU - 101 Clear Lacquer

INTRODUCTION
 
Tuff Coat PU-101 CLEAR LACQUER is two component systems designed to cure at room temperature. It consists of Base component & Hardener component which on mixing krosslink to form tough film with outstanding durability, chemical & weather  resistance.
 
RANGE OF APPLICATION
 
Besides its excellent gloss & gloss retention properties, it also provides resistance to UV Light as it contains UV absorber. This Lacquer can be suitably applied on properly cured Epoxy Paints, Stoving, Enamels, and PU-paints; faster drying is an added advantage. This make the system useful for maintenance coatings, structural coating etc. Resistance to Oils, Alcohol, Salty weather, Abrasion & heat make the system ideal for Aircraft finishes, transport finishes & chemical Industries.
 
KEY PROPERTIES
 
•
Rapid cure at room temp.
•
Excellent gloss & gloss retention
•
Unaffected by splash & spillage of Alcohol
•
Excellent Water resistance
•
Excellent Oil & Grease resistance
 
APPLICATION
 
Ensure that the surface is free form dust & foreign particles. Mix BAse component & Hardener component in the ratio 4:1, thin down to get required viscosity using PU- 101 Thinner .
 
STABILITY  OF HARDENER
 
Once the hardener container is opened, try to consume it immediately, because it reacts with moisture in the atmosphere, which results into gellation.
 
 
 
 
{Designed by : MID   Hosted by : GID   Promoted by : PBD}